Megaleecher.Net

Making technology work for you...

Get Your Free Subscription By Email:

Flashing And Upgrading Chinese MP4 Player Firmware

MP4 PlayerIf your are not an audiophile and don't care much about audio/video quality, cheap chinese MP3/MP4 players are just for you, these devices are quite popular and just get the job done, since there is no quality control over these devices they do not last long, one of the most common problems faced with these portable players is the issue of firmware software corruption, I encountered a similar problem with my friends PMP which refused to start getting stuck at loading screen, the only solution was to flash the firmware but the problem was unavailability of any information and tools to get the job done, after long research and flashing the firmware I was able to successfully recover the MP4 player to working condition.

MP4 Player Firmware Corruption

Here is an step-by-step tutorial on how to identify your MP4 player, download its firmware and flash it using appropriate tools :


WARNING : This procedure can render your device dead, so do not try if your player is working fine.

  1. The most important step of the whole process is to correctly identify your device CONTROL CHIP and CPU, using wrong firmware or flashing tool may cause damage to your device, unscrew and open your device and write down all chip id's and motherboard numbers you see, you can also try the EasyChips - firmware identification utility but it did not worked for me.
  2. Identifying MP4 Motherboard And CPU
  3. You will now need to download the correct firmware and flashing utility for your device, visit sites below and search for your control chip and cpu to download the firmware and flashing utility, you can also post on user-forums to get help identifying the firmware :
  4. In my case the chipset was Sunplus AJ262-V7 and the utility needed to flash it was FRM Pro.
  5. Once identified you need to connect your device to computer via USB in camera mode (Press A + OK button and plugin USB cord on player), for Windows to identify this mode you will need camera drivers you need to point Windows Found New Hardware Wizard to Driver folder downloaded with the FRM Pro utility above, this will install the first camera driver, for correct identification by flashing utility you need to install a second camera driver - open Windows Hardware Manager and install unidentified camera device drivers by pointing the driver wizard to Driver folder used earlier.
  6. Now install and launch FSM Pro flashing utility and follow these instructions to install the new firmware.
  7. FRM Pro Flashing Utility
  8. Let the process finish, this will take a while, do not disconnect or interrupt the process until you see a success message in log window.
  9. MP4 Flash Log Windows
  10. Unplug your PMP from computer and it should be working now.

Comments

Thanks alot for this information I do have the Same PMP player, but I don't have the Driver Cd with it and I am not able to use the Pc Camera Feature If you can upload the Driver Cd I'll be Highly thankful. My PMP player does not have an FM player But can I upgrade the Drivers to get the FM player(Radio)........
I'll be waiting for you reply..

The Drivers in FRMs Pro folder Does not seem to work.. Please Help me...
Windows Xp does not Detect as The Camera drivers.

i was wondering if this will work on those poorly chinese copy of the ipod.. email me with your responds

hocico666@hotmail.com

thanks!

cnt flash mp4!'''''"""""Please insert image First""""""in log viewer

it seems that you havent back up your device,go to advanced,click rsv>set working folder>after setting>Click RSV>RSV info>Click A>Get >click B>get B>Click Firmware>Get >Click Firmware>set firmware>click working fo;lder>refresh tree>go back to basic tab>click on isp!!!

how about information on how to solve/repair a unit with flashing interrupted,and now when im backing up it is stuck in RSV Info and nothng more..

I DONT HAVE ANY OF THE DRIVERS

CAN ANYONE TELLME WERE TO DLOAD FROM

plsss help me how to get that program plsss

Can any One Tell about The Driver Where I Can Download Becouse FRm Pro Driver Is Not Use .
Or How I Connect Ipod In The Computer (A+OK Buttun ) I Can Use These Buttun But No respons So Plz Help Me.......................?

My Yahoo Id
Diskj_virus@yahoo.com

sir plz.pass me the flask 4 PMP portable aj262_v8

sir plz send me pmp player flashing software and driver

i have my mp4 player but it is still on blue screen and a small ball center the screen
i want your help to repair my new mp4player

i have my mp4 player but it is still on blue screen and a small ball center the screen
i want your help to repair my new mp4player

bro ung mp5 mo ba indi nag poproceed sa main menu ???

How to repair, my screen MP4 player is bad and display raster.

atj2137n
hbo41bb 109 chip
but it is still on blue screen and a small ball

I always exercise a cautious method of repairing mp4/mp5 sunplus but this time I am gald that someboby post a method of formatting the firmware,i'm so glad that if you won't mind,please send me a copy of the utilities which I can use of,

yourstrully,

Rey frm. phil.

i have a mp4 but they have monitor blue and said insert usb lin to use usb disk.i insert they and always said usb disk..please help me anyone please

help me please.i have a mp4 player,but he not work.they screen is lue and said usb disk please help me anyone help me please

my device just show the logo ( it usualy shown when the player booting up ).but , my device is steel shown that, can't go to main menu.
1. how to flash it?
2. how to upgrade / repair it?

help me
slowbutgrow@yahoo.com

When I first got it it worked fine. I made no changes to it but a week later it refused to play ANYTHING. All I get is DISK ERROR. That includes photos, videos, MP3's, and even the games that were pre-installed on the unit. I tried reformating the disk, no help. There is a reset button in the back of the player, no help. Here's the wierd thing, and I've owned several of these things: usually the problem is the device not interfacing with your computer, that IS NOT the problem. You can plug it in, go to DISK G (the drive I assigned it) and all the files ARE THERE!!!! It's LIKE a large flash drive that stores all the files you tranfer to it, it just can't play those files itself. You can play those files on the computer from the device so the data is uncorrupted, IT'S IN THERE!!!! The device just won't play anything. I've tried changing all the various SETUP settings and NOTHING helps. Again, I have owned about 5 of these things. Soem work perfectly, some don't interface with my computer, but I have NEVER had this problem before. Ideas? Thanks.

Two set of chipset written on the board, what to choose?

AJ262-V5 080806 is the one written on the front, AJ262-V4 080806 at the back. So what am I suppose to download v5 or v4?

first my english is no very good, I speak spanish so i do my best. I have one type of those chinese PMP. this is my pmp MXD-zTouch how looks like

http://www.amazon.com/ZTOUCH-Player-Camera-Recorder-Screen/dp/B00203256M

i've the cd which came whit it but i did not see any drivers inside, it come with software to convert video, the software(FMR Pro) to change the firmware or update it and a back-up of the firmware. So if anyone have the same pmp and need the cd be free to email me at this address hackersdbm@gmail.com

I'm also searching for a firmware update and find the way to add more game to it. I'll be glad if I can help you ;)

i have a touch portable media player.need help cant get started. disk wont work can you help me get it going.any info will help.butlerbrett@live.com

Hi I have the same problem. And I was wondering if you got any response to your question. I need help with my lie-pod. will not work and my system is telling me the error message (does not recognize device. Please Help thanks

thanks very

Can you Please assist i have installed all drivers and followed your instruction even than i am not detting any message in Log Window. I am trying it on Windows XP. Even I dont know which chip my ipod have. How do you got your chip let me know.

Please reply Me at adityya_prabhu@yahoo.co.in

You are my last hope!!!!!

i want to Frm pro software.
myomgmg08@gmail.com

eisu1980@gmail.com

how to modify the brightness and gamma of the camera of the sunplus spmp 3052a hl1s1?.. i think the firmware is hynix kor hy27ut088g2a.. please someone email me for the answer at migs308@yahoo.com

thanks and more power.. ^^

HELP me PLEASE
I just got a pmp mp4 diditrl player the instruction are useless does not give any info on how to put music or movies on it. I have no idea what im doing is there a web site or can anyone give me step by step instructions on how to down or upload movies and music on this thing and can i put my own dvd's and cds on it. THANKS

hi friends ,
-i do fixen my mp4 player few years ago trying to
upgrading it with FM radio firmware, and it
works now without bugs.

-i have this type of PMP with this Id;
PL24-3052-tjlt8-v1.2
-i found the firmware on google.com inder 4share link.
-i downloaded it, but i nevre found any driver for the
2 cams.
-i 'm looking for: what the hll are these chinese drivers!
how can i use them

please respond on : sweetbouras@yahoo.fr

ok freind , i found how to get the 2 drivers for the camera,
you get to driverMAx.exe,you can download it from this page,the link at the bottom of the page.

Hi freinds,
these are the steps,just be cool and don't get nervous:
1- go at the bottom of this page, and look for how to
download DriverMax.exe
2- after installing it, push the "identify unknown
hardware" under "drivers download info"
3- automaticlly, the software will look it self for the
drivers of the 2 camera drivers.
4- finally you get the FRM PRO program working, and now
i 'm waiting for results.

sweetbouras@yahoo.fr

1 devices Detected !
[Dev NO.Undefined] -- FAIL --
FRM_WORK_PATH_ILLEGAL(38) -- !
My device id is spmp3052b
please help me

I have problem with spmp3055A-hl171
FRM Pro - illegal (38)--!

PLEASE HELP ME

dear right click on rsv and set working folder first

Please Give me This Device spmp3055A-hl171 cam driver i have also this device in this i want to update my firmware but No Device Detected ! message is coming Please Please Please Help Me my Mail ID is " attharp@gmail.com "

UPLOAD FRIMWARE FOR PL24-3052-TJLT8-V1.2 ON MIDIAFIRE.

nice fir,ware tnx...mwahhhh

my name is saleem. i have a problam in mp4 . i dont have a driver .. please help me
saleemahmedsss@yahoo.com

i have a mp5 but i cant use it anamore bec. its hung up. i need to re pogram my mp5 but how. plssssss helppppp me.my mp5 is? xhm 7678f what is the exact FRM PRO that i can use to re program my mp5 pllllllllllssssssssssssss help me?

im woried of my mp5 it dosnt work. bec? its hung up? and i need to reprogram or flashing it but how? what is the exactly FRM PRO that i can use my pmp is Xhm 7678f?plss help me just send me at wenzque_24@yahoo.com. plsss plss plss?????

Sir!
My mp4 cpu s.n: ATJ2137
za41lfa-55c.
please give me the firmware & all necessary software of my camera & LCD.
My EmailAddress: ccimran@hotmail.com
ccimran@yahoo.com
Thanks.

help me please i have a laxstar chinese mp3/mp4 player with camera ... but the pmp refuses to go beyon BOOT screen...STARTING....
please help me
sumitbir2007@yahoo.co.in

i hav a mp4 player and chips are ak1025 and hy27ht088g2a.
my player don't connect to my computer. it only restarts.
i can hear the fm radio but when i try to open any music files it says "empty disc" . i can't formate it. it's disc space is always full.

1. how to flash it?
2. how to upgrade / repair it?

help

shuzonudas@yahoo.com

MY SUNPLUS SPMP 3052A-HL171 MP4 DID NOT WORK THE SCREEN APPEAR WHITE IS THERE ANY SOLUTION TO MY PLAYER

mharland_007@yahoo.com
hope you help me tnx....

just press the reset button
which in some mp4s looks like a small hole

Can you e-mail me on how to be good in repairing MP3 MP4 & MP5 this is my e-mail address clinton_dell@yahoo.com

thanks\\\\\\\\\\\\\\!!!!

hello
please help me my mp4 are dead please give me a solution.
thanx.
umair91pk@yahoo.com

i have chinese mp4/mp3 player but when i put software in my chip through computer and put that memory stick in chinese mp4 player it is not detected or seen on that. how to install movie player or song player on my chinese mp4 player

i want, ATJ2137N-za30cbb c34,chip number this firmware file and i am searching sites but i am fail please help me

the number written on the board is a.not any number how to get its firmware

I have exactly same player that you showed in the pic. Plzz give me the firmware file.

ankuresh@hotmail.com

need help to get mp4 player to work.i put disk in and i cannot get media player to reconize it.can someone help.e-mail me butlerbrett@live.com.

I am sure that your players will work again, but flashing/reprogramming of mp4 players need some experience, try, try and try again, you will win.
www.gsmhosting.com and signup and go to mp4 forum
www.marvelgsm.com and do the same
www.gsmsolutions.com
www.windexgsm.com

there are many other sites, I found these sites great for mp4 repairing and I am doing the repair in my city. If want any help, contact me alok_nair@yahoo.com, post your results and links in this forum to help others

Hey everybody !

I*m owner of the never china MP4 player too. Also my player froses sometime on welcome or in the middle of playing some "strange" video. (Otherway it works fine)The solution is simple : let it go out of power and connect it back to PC when it*s totally empty. It*s work fine to me.
MY PROBLEM IS : how to add more games to my mp4, how to manage/modify system files, how to find aproportiate software to recognize the hidden partitions
and system files.
I*m unable to identify my BOARD ID, the only regognizable chip number is on the biggest one chip ATJ2237 ( Thttp://bbs.mydigit.cn/read.php?tid=142970 ), but it seems to be control chip ?!
Can anybody help me ?
thx

i wanna installion firmware for sony mp4 n jxd mp4 pls show me aphoto n software .

i need hel for my player
while in 3 minutes nag white screen
what the problem kaya

hi i need a software for my mp4 its already dead.. what should i do .. pls anybody can help me with this.

my mp4 was already dead my contrl. chip no. is sunplus spmp3052a-hl171-0731 and camera is st3303.. i need the specific on how to reformat ... pls. pls. pls.asap.

my mp4 palyer its not connect with software. ple send me method of connecting and image create for flashing for mp4 player. ple ple my email address is below.....

mfiazali@yahoo.com

i have my mp4 player but it is still on blue screen and a small ball center the screen
i want your help to repair my new mp4player

any one help me
my difital mp4 mp5 player is not play game video mp3..
this is software problem...
pmp player flashing software and driver
ver...v8.1.091015_8_3919

pls help me repair my mp4. i dont know what code are you telling. thid id the only code i can read in my chips, AK1025. other chips are cover with tape. Thanks

that's no problem about this program. But where i get firmware to my mp5 player? Boar id is SK626B_080107 with SPMP3052A CPU. That is my big problem.....anyone can help me..? Please...

hy boss i have spme like pic mp5 player i need firmwere

i need it, very important.
i haven't no firmwares and softwares.
how can i use softwares, and how can i search firmwares

The MP4 type:
size: 1GB
CPU: AK1025
memory: SPT
SP3767AHN
07JS18
Please help me!!!! thank u in advance!!

sorry my english is not good

chipset : sunplus spmp3052a hl 171
I have firmware file but not upgrader can any one help
it was ok when i format it on pc it goes in that position

have you got the firmware ? can you share it with me ? reply please..

Hmmm, surprised to see these things are still in use.

hahahah, yupp. i have my Mp4/Mp5 from last 8 years.... and don't know what i can do to revive this. but still hoping for the best.

WHERE CAN I DOWNLOAD FRM PRO FROM OLDEST VERSION TO LATEST VERSION

TNX....

thanx

sank you

hi all

Bonjour tout le monde, j'ai acheté un MP4 Digital Player qui a bien fonctionné 2 mois puis là il reste bloquer avec un écran bleu + un sablier qui reste figé ? je ne sais pas comment faire RESET, j'ai même utilisé HP USB Disk Storage qui ne veut pas marcher non plus...à l'intérieur il est noté sur des puces AK 1025 et puis l'autre Sumsung 843 K9G8G08U0B PCB0...j'ai même acheté une nouvelle batterie Nokia BL-4C...je suis sur Win xp...Pouvez-vous me dire la conduite à tenir pour le débloquer avec un grand merci d'avance.
Cordialement.

My MP4 player is ....
Hynix H27UAG8T2ATR (BC 941AA)
MIPKO7918

and ...

Mother Board = AJ262_V8 090604

I don't know Firmware Versions and Tools to repair it.
Pleas help me brothers.

my mp4 not detect there is a problem hang and not going to start? so any one help me

plz tell me i get back up mp5 player but is fw bin file is so larg what i do

dears hardwarks member

i have mp5 spmp 3052b the device still (light your life) i have the device firwer or flasing fils
but when i plug in data cable do the flash device on or still same words.its not connet my system plz tell me how i can connet or what make some specail cable for it plz tell me coneting mathod i m wating
thnks alote

hi friends tell me from where i can download the Image A and B because i am not able to get A image or B image from the player. i have FRM Pro1.2.0 and firmware in *.BIN file. but i do not know what is and where is problem just the thing is A B images.

please help me about this

thanks a lot!

shanu_india@yaoo.co.in

When I plug it in to my usb port, my computer does not recognize it. I know that when you plug something into a usb port, there should be a file that you can pull up with player info and what-not, and the player wont even turn on. Any ideas of what I should do?

Pls help me to find out the firmware for following dead MP5 player

SPMP3052B-HL171
CAM : XHB 7678F

Board ID: T036_V7 20091106

Thanks in advance...

Aamir

can some one tell me how to put my spmp3055-hl171 in camera mode so i can get it off light your life logo

PLz email tin87@live.com

Anyone out there know where to download games for this china made Sony PSP??? I accidentally default setting and all games deleted....thank u very much!
Plz email-rrvk888@gmail.com if u have any info ...thnx again!

hey my mp4 player starts but dont show the recently added files and recently added photos and show them as curropted file..pls help me..

hello man i have a china mp4 player but he show a blue window with loding i download your flash player but i don;t know how to use it please brother please and plz you make avideo of who to repair your mp4 player and attach on mp4 flashing player on your site plz brother help me i m very poor person please

my chines mp4 show only starting monogram and still when i on the mp4.please told me any solution.

my mp4 r started but no any one button working

HOW TO FIX MY PMP?

THE CHIPSET SAYS

"SAMSUNG 013
K9GAGO8UOM
PCBO
YCC324BAC"

and the other one is

"0119WR
V54C365164VDT45"

I can't find any firmware of SAMSUNG.........
pls help me!

my mp4 player's motherboard is

SAMSUNG 013
K9GAGO8UOM
PCBO
YCC324BAC

pls help me what to do!!!

Guys this is the time to I need your help...
because my Gadgets was hang...i can't ......open always Loading only if I open
i Don't how to reprogram
please Help me......
I need yor help

thanks
God bless All

tatoyromeo@yahoo.com

help me how i can update this firmware

cpu info

spmp 3052B-HL171
0911
M192B15

i have mp4 player.
when i click on isp button then all process successful but last process says image file file not supported.

board id:090818
version: 280-v13
chip : mmspmp 3054a -hl171
0928
camera : xhb 7678f
please help me and give the firmware.

Hi help me.
I'd like to get sony/jxd/SYH firmware and software.
I also don't know how to use them.
How can i know which is control-chip or CPU number?

i have a soney mp4 player. when i connect to computer, nothing come up.

my mp5 sony give me black screen and work when i connect it to frm and try to (get a image gie me this message)
[Dev NO.Undefined] -- FAIL --
FRM_ISP_PATH_ILLEGAL(40) -- !
plz help me

help me solve this problem regards on my mp5
i need to reprogram pls. help me
my chipset is SX-2.8CPT-932502
MY cam ID is CY0307
PLS. help me...

Hola que tal mi pregunta es sobre un mp5 creo que es por que contiene camara con marca AIO NEW AUDIO SEGÚN LEÍ EL CHIP ES TOASHIBA 006739 9921KBK pero no consigo nada de nada ni el firmware si me pueden dar una mano se agradece mi correo es desde ya gracias

my mp5 doesn't show anything, can't open it...it is all black out! computer cannot detect my mp5...
no devised detected! is prompt in log window...

My computer does not recognize my ipod device. Can you tell me how to get the computer to find the device? the ipod turns on and only says Welcome. It will not go to the home screen. Please let me know what will work on the Chinese copy of the ipod touch.
Thanks,

I NEED HELP, ON THE FRM TOOL, IT SAYS Check ISP core -- FAIL -- ON THE LOG WINDOW AND IS DOES NOT FLASH I NEED TO DO THIS URGENTLY BECAUSE I USED THIS AS A FLASH ASWELL AND IT IS NOT RECOGNIZED IN WINDOWS UNLESS IT IS IN WEBCAM MODE

Sorry for bad english.

Anyone can help?I have an infamous chinese mp4 player.After an unexpected self-restart,it become a silent device.Only FMradio work properly.Am I have to flash my mp4?And where can I get the flashing software?Please sent link to lonelydre4m3r@yahoo.com.
Thanks

Can u explain me.
Fonts are not shown in correctly installed EasyChip
What font is using in this.
Thank u Sir.

sir my mp4 player is still on hello

sir my digital mp4 player is still on loading..please help me.
e-mail me plz.

HELLO DEAR,I'M WORKING IN ALL KIND OF CHINESE MP3,MP4 SOFTWARE AND HARDWARE PLEASE SEND ME YOUR PLAYER FULL DETAILS LIKE THIS
CHIP-BOARD ID-LCD ID-CAMERA ID
ADD ME IN YAHOO MESSANGER JAN_NASEER_JAN@YAHOO.COM
THANK YOU

Asslam O Alikum Everyone I'm Working In All Kind OF Chinese Mp3,Mp4,Mp5 Players Software And Hardware If Anyone Need Help And Any Firmware Please Contact Here

All Kind Of Chinese Mp3/Mp4/Mp5 Software & Hardware
REHMAN GIFT CENTRE SHOP#39 HAKEEM CENTRE,PREEDY STREET NEAR PAESAIN BAKERY SADDAR KARACHI
Contact: +92313-2217128
Jan_Naseer_Jan@Yahoo.Com

In Facebook https://www.facebook.com/pages/Sunpluszonecom/208740352504668

Hi,Jan

I need a MP4 development tools like H/W(Mockup) and FirmWare source
using ACTION ATJ2237D. Features are just standard MP3 with Image file of photo.

Do you have any ready set and related data?
Also let me know the cost.

Thanks n regards.
Kenzie

I have mp4 player spmp3055a-hl171. but i need camera driver.
Thank in advance

i have bkeestar bp503v10 mp4nd its chip is hynix H27UAG8T2ATR.
BC 943Ashows white screen nd then hanged.How i can flash and upgrade its firmware and where??????

i cannot install "MMcatch(VII) Video Camera Device" Driver...plss..help me..i've already install icatch(VII) still camera device...my OS is windows 7..

AS211A_V1003 - where can we get this version of FW for chinese Ipod nano 4g?
And what about software for this firmware? :)

During switching player on - it’s only a fast blink on the screen, and then nothing, no loading.

I have the same firmware on 6th generation mp4,
but when i connect to pc windows show Usb device not recognised

what firmware will i use for this???

Hynix KOR

HY2UT088G2A

TPCB 834FA

MTXJ0591

reply here plssss

what is the firmware?

Hynix KOR

HY27UT088G2A

TPCB 809A

Hi i have a chinese mp5 player
and its cpu id is
hynix 27ufo84g2b
And i haven't found the firmware utility on internet
So,please give me the firmware utility
you can reply me at ieshan.kashyap@yahoo.in

hi everyone
i have a mp4 player of jxd. who details which i have found on opening it are as follow:
model: jxd 656

cam id : QR768B
20058

LCD ID: NT4SHY3624A
081109

SUNPLUS 3052A-HL171
0834
M187W27

FLASH: HYNIX KOR
HY27UT088G2A
TPCB 840A

ELPDA SINGAPORE
D4512816305
A75-9JF
0749XE02T

BOARD ID: JXD206DD1
0813
I HAVE UPDATED MY FIRMWARE MANY TIMES BY CONNECTING WITH THE PC.
I HAVE ITS DRIVER ,PROGRAMS AND FIRMWARE ETC.
ONE DAY WHEN I WAS UPDATING THE FIRMWARE BY PRESSING TE KEY COMBINATION IT WAS DETECTED BY MY PC.
BUT WHILE UPDATING I HAVE DISCONNECTED FROM THE PC BECAUSE IT WAS TAKING LONG TIME.
SINCE THAT DAY I AM UNABLE TO CONNECT IT AGAIN TO MY PC.WHENEVER I CONNECT IT IS NOT RECOGNIZED BY MY PC.AT THAT TIME I WAS NOT AWARE THAT WHILE UPDATING FIRMWARE PLAYER SHOULD NOT DISCONNECT.
I HAVE SEARCH A LOT AND SOMEONE SAID TO SHORT CIRCUIT SOME PIN OF FLASH AND CONNECT IT AGAIN IT WILL BE DETECTED .

CAN ANYONE HELP ME WHICH PINS OF FLASH HAS TO SHORT CIRCUIT OR WHAT TO DO SO THAT IT CAN AGAIN DETECTED BY MY PC.
PLEASE HELP
THANKS

hi everyone
i have a mp4 player of jxd. who details which i have found on opening it are as follow:
model: jxd 656

cam id : QR768B
20058

LCD ID: NT4SHY3624A
081109

SUNPLUS 3052A-HL171
0834
M187W27

FLASH: HYNIX KOR
HY27UT088G2A
TPCB 840A

ELPDA SINGAPORE
D4512816305
A75-9JF
0749XE02T

BOARD ID: JXD206DD1
0813
I HAVE UPDATED MY FIRMWARE MANY TIMES BY CONNECTING WITH THE PC.
I HAVE ITS DRIVER ,PROGRAMS AND FIRMWARE ETC.
ONE DAY WHEN I WAS UPDATING THE FIRMWARE BY PRESSING TE KEY COMBINATION IT WAS DETECTED BY MY PC.
BUT WHILE UPDATING I HAVE DISCONNECTED FROM THE PC BECAUSE IT WAS TAKING LONG TIME.
SINCE THAT DAY I AM UNABLE TO CONNECT IT AGAIN TO MY PC.WHENEVER I CONNECT IT IS NOT RECOGNIZED BY MY PC.AT THAT TIME I WAS NOT AWARE THAT WHILE UPDATING FIRMWARE PLAYER SHOULD NOT DISCONNECT.
I HAVE SEARCH A LOT AND SOMEONE SAID TO SHORT CIRCUIT SOME PIN OF FLASH AND CONNECT IT AGAIN IT WILL BE DETECTED .

CAN ANYONE HELP ME WHICH PINS OF FLASH HAS TO SHORT CIRCUIT OR WHAT TO DO SO THAT IT CAN AGAIN DETECTED BY MY PC.
PLEASE HELP
THANKS

what is the firmware?
help..
Hynix KOR

HY2 7UTO88G2M
TPCB 737 A

Read more: http://www.megaleecher.net/MP4_Player_Firmware#ixzz1kudJEMlV

Hello sir!
I am saad from islamabad.My mp4 chip name is ATJ2237T i also found its firmware.but when i connect it to pc via usb hub it shows me as a Actions Usb 2.0 but its not showing me as a memory device so i could install firmware.when i connect it with charger its Charging light(yellow light) turns on but its lcd doesn't display anything.
i tried to install firmware using usb boot tool.when i double click on That selected Usb where the firmware is going to install its Capacity is shown as 0Mb
Please Help me.

Hello sir!
I am saad from islamabad.My mp4 chip name is ATJ2237T i also found its firmware.but when i connect it to pc via usb hub it shows me as a Actions Usb 2.0 but its not showing me as a memory device so i could install firmware.when i connect it with charger its Charging light(yellow light) turns on but its lcd doesn't display anything.
i tried to install firmware using usb boot tool.when i double click on That selected Usb where the firmware is going to install its Capacity is shown as 0Mb
Please Help me.

jxd mp4 m300software

Dear sir i have 1 mp4 player like this when i press the power buttom it always show "liting your life" then nothing happen. keys r not working what to do sir plz tell me ta solution.

Dear sir i have 1 mp4 player jxd200b when i press the power buttom it always show "liting your life" then nothing happen
i tried to update my jxd200b but i can't detect to my pc plaese help to detect to my pc

how can i make my computer recognize my mp5 player ???? im trying to connect it several times but my computer doesnt detected my mp5 player ... please help me how can i make my computer found the driver of my mp5 player ....

USB device not recognised show me on computer
What I must Do
Plase Help Me
Firmware AS211A_1003
if someone have driver or etc. please send me
igor.4t2@hotmail.com

spmp3055 driver for window 7.I need.Please help me>

please help me fix my crown japene mp4 with atj2085 board

I need a firmware for my Jess Q MP4/5 player. Where on web can I find it?

Hi guys!
I cannot find anywhere the firmware and flashing utility that match my Mp4 Digital player. May you guys help me please?
hynix h27uag8t2bth
bc 042a

Here is my player bigshot 2gbfm
http://image.ec21.com/image/astrofly...PMP_Player.jpg
and i want to start is show only LIGHT YOUR LIFE and after nothing else is hapend,what i do for reability?
i instaled FRM but i dont now how to work step by step,and firmware i think i need for my pmp,my device is conected with usb to pc and detected IIcatch video and MMCATH video driver found and instaled but i dont now how to proced to put firmware and in frm detected 1 device but i receive vendor comand... and eror code 39-40 isp path error and what i do next?
my player is 280_v13
090818
integrated is samsung 004
k9gag08uom
in frm i receive:
--------------------- Dev Detect End --------------------
1 devices Detected !
[Dev NO.Undefined] -- FAIL --
FRM_FW_PATH_ILLEGAL(39) -- !
Create disk image A --- FAILED! ---
Create disk image B --- SUCCESS! ---
[Dev NO.Undefined] -- FAIL --
FRM_ISP_PATH_ILLEGAL(40) -- !
[Dev NO.Undefined] -- FAIL --
FRM_ISP_PATH_ILLEGAL(40) --

Please how can get to the instruction page (not working)

http://cache.chinabuye.com/media/catalog/product/cache/1/image/300x300/5e06319eda06f020e43594a9c230972d/3/8/38928.JPG
from chinabuye.com

I want to change the splash and update the firmware if possible.. Thanks.

I have a kingneed MP4 With this Id: Anyka AK3221MB2440 FA03E7
on its CPU! but I coudent flash it!
I have to say, My problem is that After a while my device didn't work and just is showin a massage that "The system is broken..."

I hope you have time to help me.
GOOdluck

hello sir, i have jxd 692 and its firmeare too... but i cant install driver . thats why its show me no device detected.. so please tell me how can i put my jxd692 on camera mode.... plz sir its urgent.... plz help me..

HELLO SIR, I HAVE JXD 692 AND ITS FIRMWARE TOO. BUT I CANT INSTALL DRIVER. LZ TELL ME HOW CAN I PUT CAMERA MODE ON MY JXD 692 FOR FLASHIG.. THANK YOU.... PLZ HELP ME SIR

Sir, I recently bought a SAMCOM MP5 video Circuit board to build my own MP5 video player. When i connect this player to TV it shows a blue screen with menu logos of the player on the TV screen. I want to change that blue background displayed on TV and make it to display my photo with the player's menu logo icons on it. Can someone please help me how to do that?

The chip description are as below:

IC 1 : SAMSUNG K4S561632E-TC1L
IC 2 : FI C100 E9002DA 19B1

Is there any possibilities that I can re-program any of these ICs as there is no port on the Circuit board to connect it to PC for data transfer or firmware update. It has AV out, USB connector for attaching Pen drive and a micro SD card slot all as inputs. please let me know if you want any picture to understand it.

Thanks and regards to all...
Hoping someone will answer me soon.

sir i have a pmp/mp3/mp4 player which firnware do i download

my mp4 player is stuck. when i turn on my pmp, blue screen with loading icon appears. i have downloaded firmware but my pmp is not detected. please help.

See I give all the specification:
Mine is a grand classic gcl-01 PSP.
It has following motherboard JR-A1-V1.0
following CHIP ATJJ2259C Z644ACC 37A
LCD GL043024

hello please tell me that how to reset jxd v1000 with firmware

thank you

Add new comment

This is just one of the many helpful tips we have posted, You can find more stories here,
Do subscribe to updates using your favorite RSS feed reader or using the secure FeedBurner email update form on top of this post.